## Codes for Treo 650

Discussion of the Treo 650 smartphone

Moderator: kocoman

zforce
Newbie
Posts: 6
Joined: Mon Jan 10, 2005 1:10 pm

## Codes for Treo 650

Post by zforce » Thu Jan 13, 2005 3:05 pm

Does anyone know all of the possible ## codes for the Treo 650 with and without modified dialer pads?

I know of

-##TETHERED
-##RTN
-##DATA
-##DEBUG

What new ## codes do the new dialer programs enable and what other ## codes exist?

Thanks

User avatar
Shadowmite
PDAPhone Hacker Team
Posts: 777
Joined: Tue Jan 04, 2005 5:58 pm
Location: Grand Prairie
Contact:

Post by Shadowmite » Thu Jan 13, 2005 4:08 pm

Ok, this is going to be the master list here... I'll update this post if I find more etc...
--------------------
-## Codes for the Treo 650
Enter these from the phone in the format:
-##"CODE"# - Upon pressing the last # the code will be ran
--------------------------

-##RTN - Shows runtime and info on phone
-##DEBUG - Shows the cellular radio debug info, signal etc...
-##PRI - Allows you to change the PRI of the phone
-##AKEY - Allows you to set a AKEY for the phone
-##LOOPBACK - Has the loopback test calls menu
-##"MSL" where "MSL" is the 6 digit code given to you for your phone - programs your phone
-##PREV - Allows you to set the p-rev of your phone
-##DATA - Main programming of Sprint vision options
-##ON - Phone on
-##OFF - Phone off
-##PASS - Phone off and Passthrough enabled
-##PASSOFF = Passthrough disabled
-##UPST - Bootloader
-##DIAG - Passthrough enabled
-##744 - ??? Flashes screen but doesn't show anything
-##TETHERED - Tethered Mode On
-##ERR -Last Error code
-##88722366 = ?TRACEON (Trace Enabled)
-##887223633 = ?TRACEOFF (Trace Disabled)
-##28722366 = ?TRACEON (Trace Enabled)
-##287223633 = ?TRACEOFF (Trace Disabled)
-##798722366 = ??TRACEON (Trace Enabled)
-##7987223633 = ??TRACEOFF (Trace Disabled)
-##TIME -Current time
---
Shadowmite

hfe1977
Minion
Posts: 12
Joined: Fri Jan 14, 2005 4:21 am
Contact:

## codes

Post by hfe1977 » Fri Jan 14, 2005 4:24 am

What does this do for my treo 650. Sorry I am new.
Thanks Hussein

gt5l
Newbie
Posts: 8
Joined: Fri Jan 07, 2005 9:21 am
Location: PA

Post by gt5l » Fri Jan 14, 2005 9:48 am

I am interested in what will the following ##codes do, in simple terms please
-##PREV - Allows you to set the p-rev of your phone
-##PASS - Phone off and Passthrough enabled
-##PASSOFF = Passthrough disabled
-##UPST - Bootloader
-##DIAG - Passthrough enabled
-##744 - ??? Flashes screen but doesn't show anything
-##TETHERED - Tethered Mode On
-##88722366 = ?TRACEON (Trace Enabled)
-##887223633 = ?TRACEOFF (Trace Disabled)
-##28722366 = ?TRACEON (Trace Enabled)
-##287223633 = ?TRACEOFF (Trace Disabled)
-##798722366 = ??TRACEON (Trace Enabled)
-##7987223633 = ??TRACEOFF (Trace Disabled)
Treoing & Loving It

hfe1977
Minion
Posts: 12
Joined: Fri Jan 14, 2005 4:21 am
Contact:

Post by hfe1977 » Sat Jan 15, 2005 5:01 am

When I tried to Sync up my treo 650 to my computer. my phone either shuts off when I press the button. or if I hold it the screen goes into red, green, blue, white bars. WHAT IS HAPPENING?
Thanks Hussein

hfe1977
Minion
Posts: 12
Joined: Fri Jan 14, 2005 4:21 am
Contact:

Post by hfe1977 » Sat Jan 15, 2005 1:02 pm

How do I punch in Letters? I mean what screen do I need to be in to make these codes work?
Thanks Hussein

User avatar
Shadowmite
PDAPhone Hacker Team
Posts: 777
Joined: Tue Jan 04, 2005 5:58 pm
Location: Grand Prairie
Contact:

Post by Shadowmite » Sat Jan 15, 2005 1:41 pm

hfe1977 wrote:When I tried to Sync up my treo 650 to my computer. my phone either shuts off when I press the button. or if I hold it the screen goes into red, green, blue, white bars. WHAT IS HAPPENING?
That doesn't sound related to ## codes, but you are seeing the bootloader if you hold the hotsync button while it resets.

If you phone is resetting when you attempt to hotsync, please start a new thread about that and we'll see if we can get you some help. It might need a hard reset...

Finally, you asked what screen to enter the ## codes from. Goto the phone screen... Dial the numbers if you want to play with them.
---
Shadowmite

User avatar
bigredgpk
Minion
Posts: 28
Joined: Sun Jan 09, 2005 10:46 pm
Location: Boston, MA
Contact:

Post by bigredgpk » Sat Jan 15, 2005 6:27 pm

hfe1977 wrote:How do I punch in Letters? I mean what screen do I need to be in to make these codes work?
You have to be in the phone app. The letters corispnond to the letters on the on-screen dial pad.

Timmay

Schnap
Newbie
Posts: 1
Joined: Wed Jan 19, 2005 7:35 pm
Location: San Pedro, CA

Post by Schnap » Wed Jan 19, 2005 8:00 pm

i am a noob and i just wanted to understand more about the ##codes

[quote="gt5l"]I am interested in what will the following ##codes do, in simple terms please




ok so ##7738# (PREV) allows you to set the p-rev of your phone

under the "Mobile Protocol Revision:

i have three options:

P_REV 1 (J-STD-008)
P_REV 4 (IS-95-B)
P_REV 6 (cdma2000 Rel 0) -hilighted

what do they do? and are there any beniftis to changing them?

thanks

joecool69
Newbie
Posts: 2
Joined: Sun Jan 23, 2005 6:09 pm

Re: ## 774

Post by joecool69 » Sun Jan 23, 2005 6:12 pm

If you are getting a error 67 on vison, Doing ##774 then hitting reset to factory default setttings, and then entering in your msl can often clear up the error 67.

joecool69
Newbie
Posts: 2
Joined: Sun Jan 23, 2005 6:09 pm

Re: ## 774

Post by joecool69 » Sun Jan 23, 2005 6:13 pm

joecool69 wrote:If you are getting a error 67 on vison, Doing ##774 then hitting reset to factory default setttings, and then entering in your msl can often clear up the error 67.

to clarify ##774 is ##PRI

mratatood
Minion
Posts: 12
Joined: Thu Jan 27, 2005 2:18 pm

## CODES

Post by mratatood » Wed Feb 02, 2005 9:48 pm

Thanks ShadowM
the information and chances to play a bit with this thing are fantasic
thanks for putting in the time to share the info
mra

hechz
Newbie
Posts: 8
Joined: Sat Feb 19, 2005 2:13 am
Contact:

Not parsing the codes at all.

Post by hechz » Sat Feb 19, 2005 2:32 am

So if your phone just sits there like a bump-on-a-log after entering the code, say ##774#. Waits 10 secs and the clears without ever showing data. That'd be abnormal? :) PEBCAK

alfredm
Newbie
Posts: 2
Joined: Sat Feb 19, 2005 8:59 am

Post by alfredm » Sat Feb 19, 2005 7:25 pm

I'm having the same problem. I type the codes in the dialer screen, and nothing happens after I press the last #.

I have an unlocked GSM Treo 650, if that makes any difference.

ShadowOK
Techie
Posts: 43
Joined: Sun Feb 06, 2005 6:16 pm
Location: USA

Post by ShadowOK » Sat Feb 19, 2005 10:01 pm

alfredm wrote:I'm having the same problem. I type the codes in the dialer screen, and nothing happens after I press the last #.

I have an unlocked GSM Treo 650, if that makes any difference.
You are pressing the select button of the "D" Pad, I presume, if not that should do the trick....
Palm III -> Handera 330 -> Sony Clie SJ22 -> Tungsten E -> and finally Treo 650 GSM

Post Reply